Voip Configuration - PBX - Asterisk

ASTERISK

[Configuration Parameters]

The following configuration is needed to use Messagenet VoIP service with an open source ASTERISK PBX.

This is the configuration to enter in the configuration file:

nat=no if public IP nat=yes if natted IP allow=g729 if you have g729 licences (you can buy it on www.digium.com) allow=ilbc if you want to use ilbc =========== /etc/asterisk/sip.conf =========== [general] port=5060 bindaddr=0.0.0.0 context=sipin nat=yes disallow=all allow=alaw ; allow=g729 ; allow=ilbc realm=sip.messagenet.it rtptimeout=60 rtpholdtimeout=300 ; incoming calls register => <USER>:<SECRET>@sip.messagenet.it:5061/<NUMERONELDIALPLAN> [sip.messagenet.it] ; outgoing calls type = peer auth = md5 username = 5xxxxxx fromuser = 5xxxxxx secret = yyyyyyy host = sip.messagenet.it port = 5061 qualify = yes insecure = very ============== /etc/asterisk/extensions.conf ============== per chiamare con il peer messagenet, nel contesto di uscita: [outgoing_context] exten => _[0356].,1,Dial(SIP/${EXTEN}@sip.messagenet.it) [sipin] exten => _NUMERONELDIALPLAN,1,Dial(somethinglocal) ============================

ASTERISK

[Configuration Parameters]

Telephones

Adapters

VoIP Routers

Switchboards

Mobile phones / Smartphones